If you run across this type situation, maybe after replacing the ABS actuator, then you may want to run the Refresh ABS Actuator utility under menu options. Let is know if this works out.
Please see T-SB-0024-19
Introduction:
Some 2011 – 2015 model year Prius and 2012 – 2015 model year Prius Plug-in Hybrid vehicles may exhibit a condition where the brake, ABS, and/or TRAC warning light(s) are on and/or a Check VSC message displays. Diagnostic Trouble Codes (DTCs) C1391, C1252...
*** This condition has an warranty extension for a free repair. Please see Customer Support Program 21TE01 here...
Please see T-SB-0028-21
Applicability:
2012-2014 Toyota Prius C
Introduction:
Some 2012 – 2014 model year Prius C hybrid vehicles may exhibit a condition in which the brake, ABS...
If you have a Toyota Tundra with the warning message on the instrument cluster that reads "Brake Controller Error if Towing, come to a safe stop with manual controls. Contact Dealer" then you will want to start by check for codes. You may come up with codes C0210 and U0129. If this is the case...
Please see Customer Support Program 21TE01
2012-2014 Model Year Prius c Coverage for Brake Booster and Brake Booster Pump Assemblies
In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Customer Support Program to provide coverage for Brake Booster and...
Please see T-SB-0115-20
Vehicle may be involved in CSP 20TE07
Applicability:
2015 Toyota Prius V
Introduction:
Some 2015 model year Prius V vehicles may exhibit a condition where the brake, ABS, and/or TRAC warning light(s) are on and/or a Check VSC message displays. Diagnostic Trouble Codes...
See Tech Tip T-TT-0538-19 (Sequoia) and Tech Tip T-TT-0533-19 (Tundra)
CONDITION:
Customers may raise a concern of a clunk type noise coming from the engine compartment shortly after start-up, due to repeated depressing of the brake pedal or shortly after the vehicle begins to move...
CUSTOMER SUPPORT PROGRAM ZKK Letter
2012 - 2014 Toyota Camry Hybrid Vehicles
2013 - 2015 Toyota Avalon Hybrid Vehicles Coverage for Brake Booster and Brake Booster Pump Assemblies ZKK
In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Customer...
Some 2011 – 2015 model year Prius and 2012 – 2015 model year Prius Plug-in Hybrid vehicles may exhibit a condition where the brake, ABS, and/or TRAC warning light(s) are on and/or a Check VSC message displays. Diagnostic Trouble Codes (DTCs) C1391, C1252, C1256, and C1253 may be stored. This...
Please Read CUSTOMER SUPPORT PROGRAM BULLETIN ZKC
Subject: Customer Support Program / Warranty Extension ZKC
2008-2010 Model Year Highlander Hybrid Vehicles Coverage for Brake Actuator Assembly and Brake Booster Pump Assembly
In our continuing efforts to ensure the best in customer...
*** The warranty for this concern has been extended. Please see Customer Service Program ZKC for warranty details here...
Some 2008 – 2010 model year Highlander Hybrid vehicles may exhibit a condition where the brake, ABS, and/or TRAC warning light(s) are on and/or a Check VSC message displays...
Some 2010 model year Prius and Prius Plug-in Hybrid vehicles may exhibit a condition where the brake, ABS, and/or TRAC warning light(s) are on and/or a Check VSC message displays. Diagnostic Trouble Codes (DTCs) C1391, C1252, C1256, and C1253 may be stored. This condition may be caused by a...
Some 2017 model year iA vehicles may exhibit Diagnostic Trouble Codes (DTCs) U0323
(PCM Software Incompatibility with Instrument Panel Control Module), U0423 (ABS Invalid Data
Received from Instrument Panel Cluster Control Module), or U3000 (IC Control Module Internal
Electronic Failure) if the...
If you run across a 2010 Toyota Corolla and you have no communication with the Hi/Lo CAN Network with ABS/Brake light on, EPS Power Steering light on, Tach/Speedo/Coolant gauge inoperative then try disconnecting the steering angle sensor to see if CAN communication is restored. This sensor can...
If you have a 2009-2011 Toyota Corolla with a customer complaint of lack of power and/or check engine light on with codes P060E, P0504, P0575, C1425, C2173 then check the rear brake lights (Dual Filament). What we are seeing is that one on the bulbs filaments will break and touch over to the...
Some 2012 – 2013 model year Camry vehicles may exhibit a condition where ABS brake actuator pump motor noise is heard from the engine compartment with Brake, ABS and/or TRAC warning lamp(s) illuminated and Diagnostic Trouble Code (DTC) C1431 stored. This condition may be caused by a poor ground...
If you have a 2007-2011 Toyota Camry and the Instrument Cluster Gauges start to act erratically then you will want to look towards the ABS Actuator Assembly as being the cause.
1) The ABS and Brake lights will come on and then go off.
2) The D (Drive light in the PRNDL area) may go out and come...
Warranty Enhancement Letter ZG1
Subject: Warranty Enhancement Program – ZG1
2006-2007 Model Year Highlander Hybrid &
2004-2009 Model Year Prius Vehicles
Extension of Warranty Coverage for Brake Actuator Assembly
In our continuing efforts to ensure the best in customer satisfaction, Toyota is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.