blind

Please see Tech Tip T-TT-0558-19 APPLICABLE VEHICLES: 2018-2019 Camry 2019 Avalon 2019 Avalon Hybrid 2018-2019 Sequoia 2018-2019 Camry Hybrid CONDITION: In some situations, the Blind Spot Monitor (BSM) Beam Axis may not update during the Blind Spot Monitor Beam Axis Confirmation. The...

Please see Tech Tip T-TT-0537-19 Revision 1 APPLICABLE VEHICLES: 2020-2021 Mirai 2018-2020 Sienna 2016-2021 Land Cruiser 2018-2021 Camry 2017-2018 iM 2016-2021 Avalon 2016-2021 Avalon Hybrid 2017-2021 Highlander 2017-2019 Yaris 2017-2021 Highlander Hybrid 2018-2021 Tacoma 2018-2021...

When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments. Creating the Centerline – Marking/securing the...

Some 2019 model year Tacoma vehicles may exhibit a Blind Spot Monitor System warning message with any of the following Diagnostic Trouble Codes (DTCs) present. C1AC1 – Master Module Horizontal Axis Misalignment C1AC2 – Slave Module Horizontal Axis Misalignment Follow the Repair Procedure in...

Some 2019 model year Avalon vehicles equipped with Blind Spot Monitor (BSM) may exhibit a BSM warning message in the combination meter immediately after engine startup and an inoperative BSM system with Diagnostic Trouble Codes (DTCs) C1AB4 (Open in Outer Mirror Indicator Master) or C1AB5 (Open...

Some 2018 model year Camry and Camry HV vehicles equipped with Blind Spot Monitor (BSM) may exhibit a BSM outer mirror indicator that stays on without a vehicle in the detection area, after being passed by another vehicle. Follow the Repair Procedure in bulletin T-SB-0050-18 to address this...

Some 2018 model year Sequoia vehicles equipped with Blind Spot Monitor (BSM) and auto-dimming mirrors may exhibit a BSM warning message in the combination meter immediately after engine startup and an inoperative BSM system with Diagnostic Trouble Codes (DTCs)... *C1AB4 (Open in Outer Mirror...

Some 2015 – 2017 model year Camry and Camry HV vehicles equipped with blind spot monitor may exhibit a blind spot monitor mirror indicator illuminating without an object in the detection area. Follow the Repair Procedure in Technical Service Bulletin 0180-17 to address this condition. This...

Toyota is working to develop a wearable device for blind and visually impaired people that will help them do more with greater freedom, independence and confidence. Called Project BLAID, it reflects the company’s commitment to enrich lives by advancing the freedom of mobility for all. The...