calibration

Please see T-SB-0049-21 Revision 1 Introduction: Some 2020 – 2022 Highlander and Highlander Hybrid and 2021 – 2022 Sienna Hybrid vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0087 (Fuel Rail/System Pressure – Too Low) and/or P107A2A (Fuel Rail Pressure Sensor...

Please see Tech Tip T-TT-0663-21 CONDITION: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments. For...

Please see T-SB-0088-21 Introduction: For proper calibration of the millimeter wave radar sensor, the vehicle and radar target must be on a level surface with a consistent plane. If a level surface with a consistent plane is not available, use the Floor Slope Compensation Procedure in this...

Please see T-SB-0078-21 Revision 1 Applicability: 2020-2022 Toyota Corolla, Corolla Hatchback 2020-2022 Toyota RAV4 REVISION NOTICE: December 13, 2021 Rev Applicability has been updated to include 2022 model year Corolla, Corolla Hatchback, and RAV4 vehicles. Any previous printed versions of...

If you run across a 2021 Toyota Tacoma (also [possibly Tundra, 4runner and Rav4) and have code U0235 Lost Communication With Cruise Control Front Distance Range Sensor stored (due to some body work, collision or had work done on the front bumper) then you may want to go into the ABS ECU, clear...

Please see T-TT-0603-20 APPLICABLE VEHICLES: 2013-2015 Avalon HV 2014-2016 Highlander 2016-2018 Mirai 2014-2016 Highlander HV 2011-2017 Sienna 2013-2015 Land Cruiser 2012-2015 Prius PHV 2015-2018 Camry 2010-2015 Prius 2015-2018 Camry HV 2012-2017 Prius V 2013-2015 Avalon CONDITION: For proper...

Please see T-SB-0026-20 Revision 1 Applicability: 2020 - 2021 4Runner 2018 - 2021 Sequoia, Tacoma, Tundra REVISION NOTICE: December 15, 2020 Rev1: The Repair Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. Introduction: All 2018 – 2021...

Please see T-SB-0120-20 Applicability YEAR: 2021 Venza Hybrid Introduction: Some 2021 model year Venza Hybrid vehicles may require the download and installation of vehicle specific software or configuration software when the Electronic Control Unit (ECU) is replaced. Techstream software has...

This is taken from TSB T-SB-0098-19 Repair Procedure: 1. Using Techstream, check for stored DTCs. Are DTCs P2646, P265B, P10A0, or P1055 present? YES — Continue to step 2. NO — This bulletin does NOT apply. Continue diagnosis using the applicable Repair Manual. 2. Clear ALL DTCs, start the...

Please see Tech Tip T-TT-0558-19 APPLICABLE VEHICLES: 2018-2019 Camry 2019 Avalon 2019 Avalon Hybrid 2018-2019 Sequoia 2018-2019 Camry Hybrid CONDITION: In some situations, the Blind Spot Monitor (BSM) Beam Axis may not update during the Blind Spot Monitor Beam Axis Confirmation. The...

Please see Tech Tip T-TT-0537-19 Revision 1 APPLICABLE VEHICLES: 2020-2021 Mirai 2018-2020 Sienna 2016-2021 Land Cruiser 2018-2021 Camry 2017-2018 iM 2016-2021 Avalon 2016-2021 Avalon Hybrid 2017-2021 Highlander 2017-2019 Yaris 2017-2021 Highlander Hybrid 2018-2021 Tacoma 2018-2021...

When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments. Creating the Centerline – Marking/securing the...

Service Bulletin T-SB-0184-17 includes precautions and key points for the front camera for Toyota Safety Sense C and Toyota Safety Sense P adjustment procedures. Situations in which front camera optical axis learning is necessary: The front camera has been replaced. The windshield glass has...

If you are experiencing: * Delayed engagement Park to Drive or Reverse to Drive * Harsh 1st-2nd upshift * Delayed upshift when using when using Cruise Control * Busy shift-like hunting gear behavior when driving on Highway speed/slight grade * Engine flare during 3rd to 4th gear shift when in...