door

2021 Toyota Highlander 2GR. Will lock immediately with the smart key when pressing lock. When pressing unlock it takes 2-3 seconds for it to unlock. Interestingly has a code in the main body ecu - B1249 double locking ecu communication stop. The fix to clarify - the initialize in Main Body ecu...

Please see Limited Service Campaign (LSC) 22TD02 (Link Needed) Condition: A seam near the fuel inlet may not have been properly sealed during manufacturing. This can allow water to leak into the interior area of the vehicle, behind the third-row seat, when the vehicle is exposed to wet...

If you run across a 2020-2021 Toyota model with remote start and the customer concern is that the vehicle stays running after opening the front door (remote start), then you may want to replace the DCM.

If you have a 2020 Rav4 hybrid AWD (smart key) and you programmed a new key but now both keys allow the vehicle to ready up and neither key will lock or unlock the vehicle, go do the ecu communication registration for id code box and steering lock. This should fix it, if not then reseed the...

Please see T-SB-0161-16 Revision 1 Applicability: 2008 - 2018 Toyota Sequoia 2007 - 2018 Toyota Tundra REVISION NOTICE: May 18, 2018 Rev1: Applicability has been updated to include 2018 model year Tundra and 2017 – 2018 model year Sequoia vehicles. The entire bulletin has been updated. Any...

Please see T-SB-0004-21 Revision 1 Applicability: 2010-2020 Toyota Sienna REVISION NOTICE: May 04, 2021 Rev1 Applicability has been updated to include 2010 and 2013 – 2020 model year Sienna vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE: The...

Please see Tech Tip T-TT-0643-21 APPLICABLE VEHICLES: 2021 Sienna Hybrid CONDITION: Some 2021 model year Sienna vehicles may exhibit a condition where the power slide door sensor assembly has a wavy or poor appearance. RECOMMENDATIONS: The most likely cause of this issue is related to...

Please see T-SB-0016-20 Applicability: 2019 - 2020 Avalon, Avalon HV WMI(s): 4T1 2018 - 2020 Camry, Camry HV WMI(s): 4T1 2018 - 2019 Camry WMI(s): JTN (Please see this Post to determine VDS and WMI's) Introduction: Some 2018 – 2020 model year North American Produced (NAP) Camry, 2018 –...

Please see TSB T-SB-0121-20 Applicability: 2019 - 2021 Corolla Hatchback 2020 - 2021 Corolla, Corolla Hybrid Introduction: Some 2020 – 2021 model year Corolla and Corolla Hybrid vehicles, and some 2019 – 2021 model year Corolla Hatchback vehicles may exhibit a sloshing or splashing noise when...

Please see T-SB-0030-20 Applicability: 2007-2020 Toyota Tundra Introduction: Some 2007–2020 model year Tundra vehicles may exhibit corrosion or paint blistering on the front and/or rear lower door sill(s). Follow the Repair Procedure in T-SB-0030-20 bulletin to address this condition...

Please see T-TT-0626-20 APPLICABLE VEHICLES: 2021 Toyota Venza, Venza Hybrid CONDITION: Some 2021 model year Venza customers/dealers may experience a condition where the front door window glass can easily be scratched when an abrasive product is used to clean the windows. RECOMMENDATIONS: The...

Please See Tech Tip T-TT-0439-17 Also Note TSB T-SB-0191-17 Power Back Door System Has Abnormal Closing Operation APPLICABLE VEHICLES: 2008-2013 Highlander 2008-2013 Highlander Hybrid CONDITION: When replacing components on vehicles equipped with the Power Back Door option, please...

Please see T-SB-0149-19 Revision 2 (Link Needed) REVISION NOTICE: May 09, 2022 Rev2: Applicability has been updated to include 2022 model year Prius Prime vehicles. The Introduction, Production Change Information, Warranty Information, Parts Information, and Repair Procedure sections have...

There is a Toyota Warranty Extension on this condition. It is called Customer Support Program ZKE and can be found here... Some 2011 – 2018 model year Sienna vehicles may exhibit a condition where the fuel lid door is loose or not flush against the vehicle body, which may prevent the driver...

This bulletin is part of a bigger warranty extension labeled CSP ZKJ which can be found here... Some 2011 – 2018 model year Sienna customers may express concern about their vehicle’s slide door performance. Upon customer request, the Inspection Procedure in this bulletin (T-SB-0069-19) may be...

***Please start by reading the Toyota Customer Support Program ZKI for full program information Subject: Customer Support Program ZKJ 2011 – 2018 Model Year Sienna Vehicles Sliding Door Functional Inspection In our continuing efforts to ensure the best in customer satisfaction, and pursuant to...

***Please start by reading the Toyota Customer Support Program ZKI for full program information ZKF Letter Subject: Customer Support Program ZKF 2011 – 2018 Model Year Sienna Vehicles Coverage for the Sliding Door Center Hinge Assembly In our continuing efforts to ensure the best in customer...

***Please start by reading the Toyota Customer Support Program ZKI for full program information ZKE Letter Subject: Customer Support Program ZKE 2011 – 2018 Model Year Sienna Vehicles Coverage for the Fuel Filler Door Hinge and Pin In our continuing efforts to ensure the best in customer...

***Please start by reading the Toyota Customer Support Program ZKI for full program information ZKD Letter Subject: Customer Support Program ZKD 2011 – 2018 Model Year Sienna Vehicles Coverage for the Power Sliding Door Cable Sub-Assembly In our continuing efforts to ensure the best in...

** For Manual Sliding Doors See Here** Some 2011 – 2018 model year Sienna vehicles equipped with power slide doors may exhibit a condition where the slide door center hinge has corroded, causing the power slide door to not fully open or close during operation. Follow the Inspection Procedure...