navigation

If you experience a 2023-2024 Toyota Tundra or Sequoia with no reverse lines on the screen like below then you will want to try this... Gts+ go to circumference module utility and register whatever options the vehicle is equipped with on the cameras and stuff. After that, enter diag mode in...

Please see T-SB-0119-20 Revision 2 (Link Needed) REVISION NOTICE: December 21, 2021 Rev2 The Required Tools & Equipment section has been updated. May 13, 2021 Rev1 Applicability has been updated to include 2018 model year Sienna vehicles.  The Required Tools & Equipment section has been...

Please see Tech Tip T-TT-0688-22 APPLICABLE VEHICLES: 2022 Toyota Tundra CONDITION: Some customers may encounter wireless connectivity concerns such as:  Difficulty to connect or start using the wireless CarPlay  Intermittent wireless connection failed error message when driving or first...

Please see Tech Tip T-TT-0677-21 APPLICABLE VEHICLES: 2022 Toyota Tundra CONDITION: Some 2022 Tundra Owners may experience the estimated time of arrival to the destination set in the Toyota navigation system being inaccurate by a factor of hours. Please follow the steps below to correct the...

Please see Tech Tip T-TT-0650-21 APPLICABLE VEHICLES: 2021 Toyota Highlander 2021 Toyota Highlander Hybrid 2021 Toyota Sienna Hybrid CONDITION: Some vehicles equipped with Premium Audio systems may experience an inoperative condition that consists of displaying a “Loading…” then a blank...

See Tech Tip T-TT-0517-18 CONDITION: Voice navigation prompts and feedback beeps are inoperative after starting the engine. This condition only occurs on Platinum grade vehicles. RECOMMENDATIONS: 1: Turn ACC ON (brake pedal released, press start button, engine not running) 2: Allow headunit...

See Tech Tip T-TT-0594-20 Revision 1 APPLICABLE VEHICLES: 2020 C-HR 2018-2020 Sienna 2018-2020 Camry 2019-2020 Avalon 2019-2020 Avalon Hybrid 2020 Highlander 2020 Highlander Hybrid 2020 Tacoma 2020 Tundra 2020 4Runner 2020 Corolla Hybrid 2019-2020 RAV4 2019-2021 Corolla Hatchback 2019-2020 RAV4...

2016 Toyota Landcruiser Micro SD cards are "paired" with the Head Unit when installed initially. Once the SD card is "paired" to a Head Unit, it cannot be undone or swapped into another Head Unit. If a card is swapped into a new Head Unit, swapping it back into the original unit will remedy...

Some 2014-2015 Toyota Rav4 vehicles may exhibit a B15E6 code in the Navigation System. This DTC pertains to a system that is not equipped to US market vehicles and should ignored. This DTC has no adverse effects on the operation on the navigation system.

Toyota is now providing Entune Updates via Download for Free. See the 2 Red colored links below to Update your system.. The software portal was designed to provide Toyota customers with the latest Entune App Suite software version for their vehicle’s Multimedia system. Provide your vehicle...

Some Toyota Lexus vehicles may exhibit a Navigation (Audio unit) system rebooting condition. This condition may be due to an errant data broadcast by Toyota's traffic and weather data service provider. the following procedure may help in resetting the Navigation System. 1) Confirm the...

From current article... If you have a Lexus and the Navigation system is inoperative or is in a reboot loop, perform a "Hard Reset" procedure. This involves disconnecting the negative battery cable for 10 minutes and then reconnecting and starting your vehicle. This should allow the system to...

An unknown number of Lexus automobiles have seen their infotainment and navigation head units broken by a bug in an over-the-air software update from Lexus. The glitch, which was confirmed by a Lexus spokesperson, was delivered in a routine software update. In affected cars, it can cause the...