1. OishiiJPN

    2022 Toyota Tundra “Clunking Noise” on startup Video and Investigation

    Start Up Sequence? (Noise Investigation)
  2. MG

    2021 Toyota Rav4 Prime Air Conditioning Compressor Humming/Buzzing Noise Upon Vehicle Startup T-SB-0042-22

    Please see T-SB-0042-22 Introduction: Some 2021 model year RAV4 Prime vehicles may exhibit a short humming/buzzing noise upon startup (Ready ON) with the compressor on. Follow the Repair Procedure in this bulletin to address this condition. Warranty Information: Reprogram Air Conditioning...
  3. MG

    High Frequency sound intermittently when ignition turned on

    Corolla Hatchback High Frequency sound intermittently when ignition on from RF interior. Sound lasts about 2 seconds. The fix was to replace the DCM module.
  4. Lewis

    Toyota owners have to pay $8 per month starting three years from now...

    Ok, that was some minor clickbait so... please read on more..... Automakers keep trying to get a piece of that sweet, sweet subscription income. Now, it’s Toyota’s turn. Nearly every car company offers some sort of subscription package, and Toyota has one called Remote Connect. The service...
  5. MG

    2020-2021 Toyota Models DCM Reset and Firmware Update (LG) T-SB-0095-20 Revision 2

    THIS TSB IS NOW OBSOLETE. PLEASE SEE T-SB-0089-21 Please Read T-SB-0095-20 Revision 2 **In our opinion, this LG Firmware update was released in an effort to fix the DCM from staying active and pinging, this was causing quite a few no start (had to jump start) conditions in 2020-2021 Toyota...
  6. MG

    2020 Toyota Tundra and Sequoia Whine Noise Upon Starter Engagement

    Please see Tech Tip T-TT-0589-19 APPLICABLE VEHICLES: 2020 Tundra 2020 Sequoia CONDITION: *Customers may complain of a whine noise upon starter engagement. *The whine noise may be accentuated when holding the key to start the engine; Alternately, the noise may be diminished by using the...
  7. Lewis

    Toyota Torque Converter Bolts (Centering Starter Bolt)

    When reinstalling a Toyota Transmission and go to put the torque converter bolts in, start with the dark colored bolt first and leave it slightly loose. Then install the rest of the lighter colored torque converter bolts and only begin to tighten them when all the torque converter have been started.