1. MG

    2020 Toyota Tacoma Elapsed Time After Start Does Not Update T-SB-0053-22

    Please see T-SB-0053-22 (Link Needed) Introduction: Some 2020 model year Tacoma vehicles may exhibit a condition in which the Elapsed Time After Start does not update in the Trip Information menu on the head unit. The combination meter ECU logic has been modified to reduce the possibility of...
  2. OishiiJPN

    2020 Toyota Tacoma Radio "Elapsed Time After Start" reading inoperative

    If you run across a 2020 Tacoma with the Radio "Elapsed Time After Start" readout staying at 0 min, then the culprit may be the Instrument Cluster. You can try to update the radio firmware and hard reset the system but it may not work. Also Toyota may issue a new TSB with a reflash so please...
  3. MG

    2019 MY RAV4 Hybrid AWD Resolver-R Not Adjusted on MID T-TT-0534-19

    Please see Tech Tip T-TT-0534-19 APPLICABLE VEHICLES: 2019 RAV4 Hybrid AWD CONDITION: RESOLVER-R NOT ADJUSTED on MID displays all the time. This is due to MG ECU logic during production. The zero-point value for the MGR was not learned. 3 DTCs may be stored: P1C5E19 (Drive Motor "B" Inverter...
  4. MG

    2017-2020 Prius Prime MIL ON DTC P0ABF28 - Current Sensor Misread T-TT-0576-19

    Please see Tech Tip T-TT-0576-19 APPLICABLE VEHICLES: 2017-2020 Prius Prime CONDITION: Some Prius Prime customers may experience a MIL ON condition. Vehicles might be put into a failsafe mode and usage of battery will be discontinued. Technicians find DTC code P0ABF28 stored in the ECU...