I’d you have a Toyota vehicle that is displaying a ! (Exclamation mark) symbol on the radio screen. Then you may need to initialize the park assist monitor.
You do this by putting the vehicle in park position with the engine running, brake pedal fully depressed and on a flat surface. Now turn the steering wheel fully right and then fully left, now return the steering wheel to center. This should initialize the park assist monitor system.
Calibrating the system is a different procedure and will be covered in a separate post…
You do this by putting the vehicle in park position with the engine running, brake pedal fully depressed and on a flat surface. Now turn the steering wheel fully right and then fully left, now return the steering wheel to center. This should initialize the park assist monitor system.
Calibrating the system is a different procedure and will be covered in a separate post…